l On the basis of Leeb hardness measurement principle, can be used to detect a variety of metal materials, accurate measurement value stability
l Instantly showing the hardness measurement, and can be used in different formats conversion between hardness of freedom
l Can be configured to 8 different impact device, automatic identification device for impact type, replaced without the need to calibrate.
l Large screen LCD display, menu operation, information rich, intuitive
l High brightness LED backlight, convenient in the dark
l Built in rapid thermal printer can print the measurement data, the scene immediately
l Low power consumption: Auto sleep, automatic shutdown function of saving energy
l Fully enclosed metal shell, strong anti-interference ability
l Ordinary alkaline battery, standby time 150 hours, suitable for field operation
Applied Materials:
l Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper (bronze), forged steel
l Tip: To meet the conditions to be measured.There has 3 conditions:The object wait for measuring must be more than 2kg,thickness must be more than 10mm,surface roughness must be no less than1.6μm.If do not meet the above conditions,it should be solid support or dense coupling.
Measuring Materials | ST, cast ST, CET Steel, Stainless, GC Iron, NC Iron, Cast Alum, Brass, Copper Etc. |
Hardness parameter | HL, HRC,HRB, HS,HB,HV |
Accuracy | Within±0.5%(HLD=760) |
Display | LCD with backlight |
Memory | 1250 groups |
Battery type | 6V rechargeable lithium-battery,USB |
Operating temperature | -20℃~+60℃ |
Dimensions | 230×86×46mm |
Impact Device Type | D,DC,DL,D+15,G,C,E |
Weight | 240g |
Standard Delivery | Main unit,Impact Device type D,Operation manual,Power adapter,Small supporting ring,Cleaning brush,High block and Certificate,Batteries,Test block with calibration certificate |
Optional Accessories | Impact DC,D+15,DL,G,C,E,Shaped support ring,Paper for printer |